{"id":16581,"date":"2024-11-19T15:08:22","date_gmt":"2024-11-19T15:08:22","guid":{"rendered":"https:\/\/support.newtec-audio.com\/docs\/led-status-control-2"},"modified":"2026-10-13T08:23:47","modified_gmt":"2026-10-13T08:23:47","password":"","slug":"led-status-smartspeakers","status":"publish","type":"docs","link":"https:\/\/support.newtec-audio.com\/en\/docs\/led-status-smartspeakers","title":{"rendered":"SMARTspeakers: understanding the LED indicators"},"content":{"rendered":"\n

The SMARTspeakers status LED indicates startup, pairing, connection and audio reception. This LED is visible on CONO canto SMART, CONO pendo SMART and CONO solo SMART.<\/p>\n

The status LED turns off automatically after a few minutes. To display it again, point the remote at that speaker and press any button. An unlit LED alone therefore does not mean the speaker is switched off.<\/strong><\/p>\n

LED colours and flashing patterns<\/h2>\n
Indicator<\/th>Meaning<\/th>What to check<\/th><\/tr><\/thead>
Flashing purple<\/th>Speaker is starting.<\/td>Wait for startup to finish.<\/td><\/tr>
Flashing blue<\/th>Speaker is in pairing mode.<\/td>Start pairing on the intended SMARTplayer as described in the setup guide.<\/td><\/tr>
Flashing red<\/th>The paired SMARTplayer cannot be reached.<\/td>Check that the paired SMARTplayer is powered on and reachable.<\/td><\/tr>
Steady blue<\/th>Speaker is synchronising settings with SMARTplayer.<\/td>Wait for synchronisation to finish.<\/td><\/tr>
Flashing green<\/th>Connected to SMARTplayer, but no audio received.<\/td>Check the source, playback and volume on the SMARTplayer.<\/td><\/tr>
Steady green<\/th>Audio stream is being received.<\/td>If no sound is audible, check volume and mute settings.<\/td><\/tr><\/tbody><\/table><\/div>\n

Original illustration<\/h2>\n
\"LED<\/a><\/figure>\n

Related guides<\/h2>\n