{"id":16621,"date":"2024-11-19T15:29:29","date_gmt":"2024-11-19T15:29:29","guid":{"rendered":"https:\/\/support.newtec-audio.com\/docs\/smartplayer"},"modified":"2025-08-26T08:00:51","modified_gmt":"2025-08-26T08:00:51","password":"","slug":"smartplayer-app","status":"publish","type":"docs","link":"https:\/\/support.newtec-audio.com\/en\/docs\/smartplayer-app","title":{"rendered":"SMARTplayer"},"content":{"rendered":"\n

<\/p>\n\n\n\n

LIVE<\/h2>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

 <\/p>\n\n\n\n

Master Volume<\/h3>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Current volume level in percent, controlled via the master volume contoller.<\/p>\n\n\n\n

 <\/p>\n\n\n\n

Mute<\/h3>\n\n\n\n
<\/div>\n\n\n\n
\n
\"\"<\/figure>
\n

Mute is activated<\/p>\n<\/div><\/div>\n\n\n\n

\"\"<\/figure>
\n

Mute is deactivated<\/p>\n<\/div><\/div>\n<\/div>\n\n\n\n

<\/p>\n\n\n\n

The SMARTplayer is muted. This setting remains active until you deactivate it again.<\/p>\n\n\n\n

 <\/p>\n\n\n\n

Source<\/h3>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Select the desired audio source here. By default, ANALOG IN<\/strong> is activated on the SMARTplayer, which plays the music source connected via the included audio cable to the device’s RCA inputs.<\/p>\n\n\n\n

 <\/p>\n\n\n\n

Sound Level<\/h3>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Sound level indicator in dB: When it lights up orange, the SMARTplayer is receiving an audio signal.<\/p>\n\n\n\n

 <\/p>\n\n\n\n

Groups<\/h3>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

All volume groups created under Create group<\/strong><\/em><\/a> in the Pairing view are listed here. Each group can be adjusted independently in volume. Additionally, the number and type of connected speakers per group are displayed.<\/p>\n\n\n\n

 <\/p>\n\n\n\n

PAIRING<\/h2>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

 <\/p>\n\n\n\n

User and password<\/h3>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

The first time you access the Pairing view, you will be prompted for a username and password. You can find the login details on the product label on the underside of the SMARTplayer \/ SMARTstreamer. After logging in, you can switch between tabs without re-entering your credentials until you close the tab.<\/p>\n\n\n\n

 <\/p>\n\n\n\n

Start pairing<\/h3>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Click to start the pairing process. Make sure the speakers are powered on and emit a detection tone. The number of detected speakers will be displayed. End the process once all speakers have been found.<\/p>\n\n\n\n

 <\/p>\n\n\n\n

Speaker<\/h3>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

All connected speakers that are not assigned to a group are displayed here. Individual settings can be configured for each speaker.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Identify<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Click Identify<\/strong> if you are unsure which speaker is selected. The speaker will emit an identification tone. On models CONO canto and CONO pendo, an LED will also light up. The process continues until you click the command again.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Mute<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\n
\"\"<\/figure>
\n

Mute is activated<\/p>\n<\/div><\/div>\n\n\n\n

\"\"<\/figure>
\n

Mute is deactivated<\/p>\n<\/div><\/div>\n<\/div>\n\n\n\n

<\/p>\n\n\n\n

The speaker is muted. This setting remains active until you deactivate it again or the speaker is restarted (power supply is interrupted).<\/p>\n\n\n\n

<\/p>\n\n\n\n

Signal status<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Strength of the received wireless signal<\/p>\n\n\n\n

<\/p>\n\n\n\n

Name<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Enter the desired speaker name and confirm your entry.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Group<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Select the volume group to which you want to assign the speaker.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Gain<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

The speaker volume can be adjusted via the gain control, with the factory setting at -6 dB. For the models CONO canto, CONO pendo, CONO puro and the subwoofers, the adjustment can also be made using the supplied remote control.<\/p>\n\n\n\n

<\/p>\n\n\n\n

EQ Preset<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

The optimal equalizer settings are preconfigured for each speaker model and displayed as Flat<\/em>. In addition, you can choose from our preset sound profiles such as Bassboost<\/em>, Dance<\/em>, Jazz<\/em>, Lounge<\/em>, Pop<\/em>, Rock<\/em>, and Voice<\/em>, or customize the sound profile to your needs.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Advanced<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Type<\/h5>\n\n\n\n
<\/div>\n\n\n\n

Loudspeaker model<\/p>\n\n\n\n

<\/p>\n\n\n\n

Serial<\/h5>\n\n\n\n
<\/div>\n\n\n\n

Unique serial number of the speaker<\/p>\n\n\n\n

<\/p>\n\n\n\n

Firmware<\/h5>\n\n\n\n
<\/div>\n\n\n\n

Currently installed firmware<\/p>\n\n\n\n

<\/p>\n\n\n\n

Restart<\/h5>\n\n\n\n
<\/div>\n\n\n\n

The speaker will restart, and all settings will be preserved.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Unpair<\/h5>\n\n\n\n
<\/div>\n\n\n\n

The speaker will be disconnected from the transmitter (SMARTplayer), but retains its current settings.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Reset<\/h5>\n\n\n\n
<\/div>\n\n\n\n

The speaker will be disconnected from the transmitter (SMARTplayer), and all settings will be reset to factory defaults. The speaker will then emit the detection tone again and be ready for pairing.<\/p>\n\n\n\n

 <\/p>\n\n\n\n

Create group<\/h3>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

By clicking the +<\/strong> button, you can create multiple groups, name them (e.g., Entrance, Cash Desk, Reception, Changing Room), and assign speakers accordingly. All speakers in a group can be adjusted together using a single volume control in the Live view, without affecting other groups or speakers.<\/p>\n\n\n\n

 <\/p>\n\n\n\n

Groups<\/h3>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

All created volume groups and their assigned speakers are displayed here.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Copy Group Link<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Copy the link to the volume group and share it, for example, with a store employee. Once opened, only the corresponding volume group can be controlled.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Edit Group<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Click here to rename or delete groups. A group can only be deleted if no speakers are assigned to it.<\/p>\n\n\n\n

 <\/p>\n\n\n\n

SETTINGS<\/h2>\n\n\n\n

 <\/p>\n\n\n\n

User and password<\/h3>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

The first time you access the Settings view, you will be prompted for a username and password. You can find the login details on the product label on the underside of the SMARTplayer \/ SMARTstreamer. After logging in, you can switch between tabs without re-entering your credentials until you close the tab.<\/p>\n\n\n\n

 <\/p>\n\n\n\n

General<\/h3>\n\n\n\n

<\/p>\n\n\n\n

Name<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

By default, the product name is displayed. You can adjust it as needed, for example, when multiple SMARTplayers are in use (e.g., Ground Floor, First Floor). Confirm the new name after entering it.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Language<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

The language selection field is currently disabled. The default language is English and cannot be changed at the moment.<\/p>\n\n\n\n

<\/p>\n\n\n\n

UTC Time Zone<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Select your desired time zone here.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Internet<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Displays the device\u2019s internet connection status.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Cloud status<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Indicates whether the device is successfully connected to the cloud. For details on potential connection issues, see the error codes<\/em><\/a><\/strong>.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Time<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Current time<\/p>\n\n\n\n

<\/p>\n\n\n\n

Uptime<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Displays how long the SMARTplayer has been running continuously \u2013 in days, hours, minutes, and seconds.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Advanced<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Cloud Register<\/h5>\n\n\n\n
<\/div>\n\n\n\n

Register the SMARTplayer in the cloud<\/em><\/a><\/strong> by entering the cloud key here. After a successful connection, this is displayed in a separate field.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Serial Number<\/h5>\n\n\n\n
<\/div>\n\n\n\n

Unique serial number of the SMARTplayer<\/p>\n\n\n\n

<\/p>\n\n\n\n

Firmware<\/h5>\n\n\n\n
<\/div>\n\n\n\n

Currently installed firmware<\/p>\n\n\n\n

<\/p>\n\n\n\n

Firmware Update<\/h5>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Firmware and DECT update for SMARTplayer and SMARTspeaker: Select the appropriate file to update to the latest version and benefit from the newest features.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Restart Device<\/h5>\n\n\n\n
<\/div>\n\n\n\n

The SMARTplayer will restart; all settings will be retained.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Reset Device<\/h5>\n\n\n\n
<\/div>\n\n\n\n

The SMARTplayer will be reset to factory settings.<\/p>\n\n\n\n

 <\/p>\n\n\n\n

Network<\/h3>\n\n\n\n

<\/p>\n\n\n\n

DHCP (on)<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

DHCP (Dynamic Host Configuration Protocol) automatically assigns network configuration data such as IP address, subnet mask, DNS, and default gateway to the SMARTplayer. DHCP is enabled by default on all SMARTplayers.<\/p>\n\n\n\n

<\/p>\n\n\n\n

DHCP (off)<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Mode for IT technicians to manually assign static IP addresses and other settings for the SMARTplayer.<\/p>\n\n\n\n

Important note:<\/strong> Changes take effect only after saving and restarting the SMARTplayer.<\/p>\n\n\n\n

 <\/p>\n\n\n\n

Audio<\/h3>\n\n\n\n

<\/p>\n\n\n\n

Minimum Volume<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

This setting defines a minimum volume and is especially useful when multiple employees operate the sound system. The master volume in the Live view cannot go below the set level.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Analog Input Gain<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

The gain control adjusts the input signal of low-volume audio sources from -12\u202fdB to +32\u202fdB. This function is available only for the SMARTplayer\u2019s analog input, with a default setting of 6\u202fdB.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Cinch Socket Input (for ANALOG IN)<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Select the analog input signal (default: Mono<\/strong>). For a single-channel audio source, you can choose the corresponding channel (Right or Left) to double the volume.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Switch Input (EVAC)<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

The switch input allows connection to existing EVAC systems. By default, the SMARTplayer is supplied with a clip that bridges the two contacts. Removing this clip, the player is muted. According to the EVAC standard, a closed contact means music continues; in case of fire, the contact opens. If your EVAC system works differently, it can be adjusted here. Warning:<\/strong> This is a potential-free contact\u2014applying voltage may cause damage and is not covered by the warranty.<\/p>\n\n\n\n

Important note:<\/strong> Restart the SMARTplayer for changes to take effect.<\/p>\n\n\n\n

 <\/p>\n\n\n\n

File<\/h3>\n\n\n\n
<\/div>\n\n\n\n

For playback of MP3 files from a micro SD card (not included)<\/p>\n\n\n\n

Important note: <\/strong>After inserting the micro SD card, the SMARTplayer must be restarted to access the files. This also applies after removing and reinserting the card. The micro SD card should be formatted as FAT32 and have a maximum capacity of 32 GB.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Upload MP3 files<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Upload and transfer local MP3 files to the micro SD card. Depending on the file size, this process may take a few minutes. Afterwards, the file can be added as an audio source under Sources<\/em><\/a><\/strong>.<\/p>\n\n\n\n

 <\/p>\n\n\n\n

Source<\/h3>\n\n\n\n
<\/div>\n\n\n\n

In this tab, you will find pre-configured audio sources. Activating a source makes it available for selection in the SMARTplayer Live view. When using a SMARTstreamer, it transmits on CHANNEL 1 by default, which is also received on CHANNEL 1 of the SMARTplayer. No additional settings are required. This applies to CHANNEL 1\u20136.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Activate audio source<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

To activate an additional source, select it and slide the toggle to the right. Confirm the change by clicking Apply Changes<\/strong>.<\/p>\n\n\n\n

<\/p>\n\n\n\n

Create a new audio source<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Click the +<\/strong>, select the desired audio source type, and enter the required data. Then click Create Source<\/strong> to add the new audio source. It will then be available for selection in the Live view<\/p>\n\n\n\n

<\/p>\n\n\n\n

Webstream<\/h5>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Create a digital music source by entering the corresponding URL. If the URL is protected with a username and password, use the format: http:\/\/Username:Password@Url<\/code>. The SMARTplayer only supports unencrypted mp3-streams. If only an encrypted https<\/code> URL is available, remove the ‘s’ to disable encryption. A large selection of radio stations can be found at http:\/\/fmstream.org\/<\/em><\/strong>.<\/a><\/p>\n\n\n\n

Additionally, the input gain can be adjusted (default: -10 dB). You can also set up a backup source that will play automatically if the web stream is interrupted, e.g., due to an internet outage.<\/p>\n\n\n\n

Click here<\/em><\/strong><\/a> to watch the video.<\/p>\n\n\n\n

<\/p>\n\n\n\n

SMARTstream<\/h5>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Creating additional digital music sources for transmission within the network from one SMARTstreamer to several SMARTplayers or other SMARTstreamers. This is only required if the preconfigured CHANNELS 1 to 6 are not sufficient. In this case, use multicast addresses, e.g., 239.10.140.30:42735<\/code>, and number them sequentially: 239.10.140.31:42735<\/code>, 239.10.140.32:42735<\/code>, etc. Add this audio source to all devices that should send or receive the channel.<\/p>\n\n\n\n

<\/p>\n\n\n\n

SMARTstream Peer to Peer<\/h6>\n\n\n\n
<\/div>\n\n\n\n

To establish a direct connection between the SMARTstreamer and the SMARTplayer, create a new CHANNEL on both devices and enter the IP address of the other device.<\/p>\n\n\n\n

<\/p>\n\n\n\n

File (Micro SD card)<\/h5>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

To play MP3 files from a micro SD card (not included): select the desired file, adjust the input gain (default -10 dB), and choose the action<\/em><\/strong><\/a> to be performed after playback.<\/p>\n\n\n\n

Important note: <\/strong>After inserting the micro SD card, the SMARTplayer must be restarted to access the files. This also applies after removing and reinserting the card. The micro SD card should be formatted as FAT32 and have a maximum capacity of 32 GB.<\/p>\n\n\n\n

<\/p>\n\n\n\n

End Action<\/h6>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>
\n

Playback stops after it finishes (no source selected in the Live view)<\/p>\n<\/div><\/div>\n\n\n\n

\"\"<\/figure>
\n

After playback ends, it restarts automatically<\/p>\n<\/div><\/div>\n\n\n\n

\"\"<\/figure>
\n

Select a source to switch to after playback ends<\/p>\n<\/div><\/div>\n\n\n\n

<\/p>\n\n\n\n

Audio In<\/h5>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Create an analog audio source via a cable connection to the SMARTplayer\u2019s RCA input (already preconfigured as ANALOG IN<\/strong>).<\/p>\n\n\n\n

<\/p>\n\n\n\n

Stop<\/h5>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

Create a stop source (audio playback stops \u2013 already preconfigured as STOP<\/strong>).<\/p>\n\n\n\n

<\/p>\n\n\n\n

Delete audio source<\/h4>\n\n\n\n
<\/div>\n\n\n\n
\"\"<\/figure>\n\n\n\n

<\/p>\n\n\n\n

To delete an audio source, select the desired source and click Delete Source<\/strong>.<\/p>\n\n\n\n

Important note:<\/strong> The audio source currently selected in the Live view cannot be deleted.<\/p>\n\n\n\n

 <\/p>\n\n\n\n

<\/p>\n","protected":false},"excerpt":{"rendered":"

LIVE   Master Volume Current volume level in percent, controlled via the master volume contoller.   Mute Mute is activated […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"default","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"_joinchat":[],"footnotes":""},"doc_category":[61],"doc_tag":[],"class_list":["post-16621","docs","type-docs","status-publish","hentry","doc_category-smart-app"],"year_month":"2026-04","word_count":1702,"total_views":"876","reactions":{"happy":"0","normal":"0","sad":"0"},"author_info":{"name":"Patrick Help","author_nicename":"patrick-help","author_url":"https:\/\/support.newtec-audio.com\/en\/author\/patrick-help"},"doc_category_info":[{"term_name":"SMART App","term_url":"https:\/\/support.newtec-audio.com\/en\/docs-category\/smart-app"}],"doc_tag_info":[],"knowledge_base_info":[],"knowledge_base_slug":[],"_links":{"self":[{"href":"https:\/\/support.newtec-audio.com\/en\/wp-json\/wp\/v2\/docs\/16621","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/support.newtec-audio.com\/en\/wp-json\/wp\/v2\/docs"}],"about":[{"href":"https:\/\/support.newtec-audio.com\/en\/wp-json\/wp\/v2\/types\/docs"}],"author":[{"embeddable":true,"href":"https:\/\/support.newtec-audio.com\/en\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/support.newtec-audio.com\/en\/wp-json\/wp\/v2\/comments?post=16621"}],"version-history":[{"count":17,"href":"https:\/\/support.newtec-audio.com\/en\/wp-json\/wp\/v2\/docs\/16621\/revisions"}],"predecessor-version":[{"id":18717,"href":"https:\/\/support.newtec-audio.com\/en\/wp-json\/wp\/v2\/docs\/16621\/revisions\/18717"}],"wp:attachment":[{"href":"https:\/\/support.newtec-audio.com\/en\/wp-json\/wp\/v2\/media?parent=16621"}],"wp:term":[{"taxonomy":"doc_category","embeddable":true,"href":"https:\/\/support.newtec-audio.com\/en\/wp-json\/wp\/v2\/doc_category?post=16621"},{"taxonomy":"doc_tag","embeddable":true,"href":"https:\/\/support.newtec-audio.com\/en\/wp-json\/wp\/v2\/doc_tag?post=16621"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}