Table of Contents
For network and IT technicians #
Follow these steps to access the SMARTplayer / SMARTstreamer directly from your PC if no network is available:
- Set up a static IP address of class C on your PC/laptop, e.g. 192.168.0.150.
- Connect the PC/laptop to the SMARTplayer / SMARTstreamer using a network cable.
- Restart the SMARTplayer / SMARTstreamer by briefly disconnecting and reconnecting the power supply.
- Within the first 7 seconds of the boot process, point the remote control at the device and press the following buttons in sequence: OFF > VOL+ > OFF. The SMARTplayer / SMARTstreamer is now accessible at the following IP address:
- IP address: 192.168.0.150
- Subnet mask: 255.255.255.0
- Open your web browser and enter http://smartplayer.local or the IP address 192.168.0.150 to access the SMART WebApp.
Direct access without IT knowledge #
For non-IT technicians, we recommend the NewTec SMARTinstallation KIT, which enables access without IT knowledge – simply connect and get started.