Connect power cable #
Connect the SMARTstreamer to the mains using the power adapter supplied. Then connect the desired audio source (IN).
Connect to network #
Connect the SMARTstreamer to the network using the CAT cable supplied and check the Ethernet socket. If the CONNECT LED lights up blue continuously, the SMARTstreamer is ready for use and is sending music into the network.
Requirement: The network uses automatic address assignment (DHCP).
Start music playback #
Start the music playback. The AUDIO LED lights up orange and the music is fed into the network on CHANNEL 1. You can adjust the volume either directly on the audio source or with the remote control by pointing it at the SMARTstreamer and pressing Vol+/-.
More information about the status LEDs
Configure SMARTplayer #
Also connect the SMARTplayer(s) to the network and open the SMART App. Select CHANNEL 1 as source in the live view.
Click here to watch the video on how to set up the SMARTstreamer.