Application #
The NewTec SMART WebApp runs on all devices (PCs, tablets, smartphones, etc.) and operating systems. It enables flexible and uncomplicated configuration of simple to complex applications.
Prerequisites #
- The SMARTplayer and/or SMARTstreamer must be in the same local network as the PC, tablet or smartphone that you use to access the app.
- The network uses automatic address assignment (DHCP).
Professional IT networks #
Professional IT networks are often adapted to the customer’s specific security requirements. Therefore, please check with your IT administrator that the following requirements are met before commissioning:
- Router with active DHCP
- SMART Audio devices are in the same network
- Multicast is activated
Service requirements:
The mDNS service enables the resolution of DNS names via the mDNS protocol. The IP address is 224.0.0.251 and the port is 5353.
Ports 80/443 and 1443 are required for http(s) and websockets. are required.
Broadcasts via UDP on port 42750 are required for the localization of NewTec products.
Port 42735 is required for multicast on the IP addresses 239.10.140.21 – 239.10.140.31 if a SMARTstreamer is used to distribute audio over the network.
The service availability should be guaranteed continuously.
Port releases:
Release of the UDP ports 42750 (broadcasts), 42735 (multicast for SMARTstreamer) and 5353 (mDNS) as well as the TCP ports 80/443 and 1443 (websockets).
Important note: Internet connection or VPN is not required for commissioning. Internet is only required in the case of external audio sources (URL) or for remote service.