Table of Contents
The SMARTspeakers status LED indicates startup, pairing, connection and audio reception. This LED is visible on CONO canto SMART, CONO pendo SMART and CONO solo SMART.
The status LED turns off automatically after a few minutes. To display it again, point the remote at that speaker and press any button. An unlit LED alone therefore does not mean the speaker is switched off.
LED colours and flashing patterns #
| Indicator | Meaning | What to check |
|---|---|---|
| Flashing purple | Speaker is starting. | Wait for startup to finish. |
| Flashing blue | Speaker is in pairing mode. | Start pairing on the intended SMARTplayer as described in the setup guide. |
| Flashing red | The paired SMARTplayer cannot be reached. | Check that the paired SMARTplayer is powered on and reachable. |
| Steady blue | Speaker is synchronising settings with SMARTplayer. | Wait for synchronisation to finish. |
| Flashing green | Connected to SMARTplayer, but no audio received. | Check the source, playback and volume on the SMARTplayer. |
| Steady green | Audio stream is being received. | If no sound is audible, check volume and mute settings. |
Original illustration #
